PadSampler Manual

For PadSampler 2.0 on Android and Windows. Both versions work the same way; differences are noted.

1. Getting started

  1. Install. Windows: run the installer from the download page. Android: install from Google Play.
  2. Connect your audio output. Android: wired headphones or a USB audio interface give the lowest latency; Bluetooth adds a lot of delay and is not suitable for playing live. Windows: open ⚙ and pick your audio interface (see Windows settings).
  3. Optional: plug in a Launchpad Mini MK3 (USB). On Android tablets and phones use a USB-C OTG cable or adapter. PadSampler finds it on its own.
  4. Load some samples onto the pads (next sections), set the tempo and play.
On Android the app keeps the screen on and keeps audio running in the background. The first time it may ask to ignore battery optimization; allow it so the system doesn't stop the audio during a show.

2. The screen

Session screen
Session screen with scene 2 playing.

Top bar (the same on every screen)

Left rail

Master

The master fader and meter are on the right, with M (mute) below.

Messages (saved, printed, errors) appear for a few seconds at the bottom of the screen.

3. Loading samples

  1. Tap edit on the left (or ☰ → Load samples). Pads get a yellow outline and don't play while edit mode is on.
  2. Tap a pad. The pad dialog opens:
    • Browse library: search and preview your sample folders (next section).
    • Choose a file from storage: pick a WAV, AIFF or MP3 file directly.
    • Loop (repeats until stopped) or One-shot (plays to the end once).
    • Original BPM of this sample: the tempo the sample was made at. Set for all samples applies it to every pad.
    • Edit in Drums / Edit in Keys: for pads made with Print to pad.
    • Remove sample.
  3. Tap done when finished.

Samples are copied into the session, so they keep working even if you move or delete the original files. The pad shows the folder name of the sample, LOOP or SHOT, and the key if it is in the file or folder name.

Loop or one-shot is chosen for you: a sample becomes a loop if its file name contains "loop", or if its length is close to a whole number of bars. You can always change it in the pad dialog.

4. Sample library

The library indexes the folders where you keep your samples, so you can find and audition them fast.

5. Playing clips

6. Tempo and time-stretch

7. Mixer

Mixer screen

8. Drums

Drums step sequencer

Pattern

Sounds

Import MIDI

IMPORT MIDI reads a .mid file. Drum notes (General MIDI) go to the matching lanes: kick, snare, clap/rim, closed hat, open hat, tom, cymbal, percussion. If the file has several parts, you pick one. The import replaces the steps; your sounds stay.

9. Keys

Keys synth panel
The synth panel. Drag a knob up or down; double-tap resets it.

The synth

ARP / FX

Piano roll

Keys piano roll

Recording live

  1. Press ● REC. If Keys isn't playing, you get a metronome and one bar of count-in.
  2. Play on the screen keys, the Launchpad or a MIDI keyboard. The pattern loops and every pass adds notes (overdub).
  3. Press REC again to stop recording; the pattern keeps playing.

REC GRID (1/16 or 1/8) sets how note starts are quantized. One recording pass is one undo step.

10. Print to pad

PRINT TO PAD (on Drums and Keys) renders the pattern into a WAV loop and puts it on a pad, so you can launch it like any other clip.

11. Sessions and set list

A session is one song: samples on pads, tempo, mixer, Drums and Keys. All in ☰ → SESSION:

Set list

☰ → Set list…: add your sessions in the order of the show, reorder with ▲ ▼. ◀ Prev / Next ▶ or a tap on a song loads it.

Link keeps PadSampler in time with Ableton Live and other Link apps on the same network. There is no master: anyone can change the tempo.

All devices must be on the same Wi-Fi. For shows and recording, a phone hotspot or a dedicated router works much better than a busy home or venue network.

13. Launchpad Mini MK3

Plug the Launchpad in over USB. PadSampler switches it to programmer mode and lights it up. The ☰ menu (STATUS) shows whether it is connected.

Buttons on every screen

ButtonAction
▲ / ▼Tempo +10 / −10
▶ / ◀Tempo +1 / −1
SessionSwitch between Session and Mixer
DrumsDrums screen
KeysKeys screen

Session

Mixer

Drums

Keys

14. MIDI keyboard

15. Windows settings

The ⚙ button in the top bar opens the settings:

Lowest latency: use an audio interface with an ASIO driver and a buffer of 128–256 frames. Settings and the sample library are stored in %APPDATA%\PadSampler.

16. Phone layout

On a phone (landscape) PadSampler shows a compact layout:

17. Tips for live use

18. Troubleshooting

No sound

Clicks or dropouts

The Launchpad doesn't light up

Link doesn't find Ableton Live

A loop is out of time

Something missing or wrong? Open an issue on GitHub.